Differences

This shows you the differences between two versions of the page.

--- qcsmarine:cnctable [2022/03/11 13:22] – admin
+++ qcsmarine:cnctable [2025/07/10 14:58] (current) – admin
@@ Line 4: / Line 4: @@
 === Software ===
   * Mach3 - 1 license from CNC Industrial (included with table)
-  * BobCAD-CAM - 1 license from CNC Industrial (included with table)
+  * BobCAD-CAM - 2 license from CNC Industrial (included with table)
+  * FreeCAD - Available on any machine.
   * Blender - Jake has been using for 3D modeling.
+  * NCViewer - [[https://ncviewer.com/|NCViewer Simulator]]
   * [[https://camotics.org|Camotics G-CODE Simulator]] (opensource)
@@ Line 13: / Line 15: @@
   * CAM = Converter from CAD to G-Code.
   * G-CODE = Instruction set for machine.
-  * [[qualitycarstereo:qcsmarine|CNC Tool Notes]]\\
+  * [[qcsmarine-cnc:tools|CNC Tool Notes]]\\
+  * [[:qcsmarine-cnc|CNC Table Use]]\\
+  * [[:qcsmarine-cnc|Tools]]\\
+  * [[qcsmarine:docs:cncstock-mics|CNC Stock Dimensional to Actual Thickness]]
+=== Docs ===
+  * {{ :qcsmarine:cnc:docs:cnc-table.manual.v917-1.pdf |CNC Table Manual}}
+  * {{ :qcsmarine:cnc:docs:mach3mill_1.84.pdf |Mach3 User Manual}}
+  * {{ :qcsmarine:cnc:cnc.millingspoil.pdf |Milling Spoil Board}}
+  * {{ :qcsmarine:cnc:cnc.settingsoftlimits.pdf |Setting Soft Limits}}