qcsmarine:docs:raymarinebleed

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
qcsmarine:docs:raymarinebleed [2022/01/26 20:05] – adminqcsmarine:docs:raymarinebleed [2022/01/26 21:25] (current) – admin
Line 36: Line 36:
 \\ \\
   - With the system in auto mode, press the -10 button ten times:\\   - With the system in auto mode, press the -10 button ten times:\\
 +    * the autopilot pump will try to drive the rudder to port\\
 +    * counter this rudder movement by turning the helm to starboard to keep the rudder stationary\\
 +    * you will be able to feel any air in the helm pump: any air in this side of the pump will rise to the helm pump and exhaust into the reservoir\\
 +    * continue until all of the air is out of this side of the pump\\
 +  - Clear any air on the other side of the pump:\\
 +    * press the +10 button ten times\\
 +    * the autopilot will try to drive the rudder to starboard\\
 +    * counter the rudder movement by turning the helm to port\\
 +    * continue until all of the air is out of this side of the pump\\
 +  - Repeat in both directions until both sides of the help pump are totally free of air.\\
  
-• the autopilot pump will try to drive the rudder to port\\ 
-• counter this rudder movement by turning the helm to 
-starboard to keep the rudder stationary\\ 
-• you will be able to feel any air in the helm pump: any air in this 
-side of the pump will rise to the helm pump and exhaust into 
-the reservoir\\ 
-• continue until all of the air is out of this side of the pump\\ 
-2. Clear any air on the other side of the pump:\\ 
-• press the +10 button ten times\\ 
-• the autopilot will try to drive the rudder to starboard\\ 
-• counter the rudder movement by turning the helm to port\\ 
-• continue until all of the air is out of this side of the pump\\ 
-3. Repeat in both directions until both sides of the help pump are 
-totally free of air.\\ 
 Note: Monitor the reservoir at all times and top up with the Note: Monitor the reservoir at all times and top up with the
 manufacturer’s recommended hydraulic fluid as required.\\ manufacturer’s recommended hydraulic fluid as required.\\
  • qcsmarine/docs/raymarinebleed.1643227548.txt.gz
  • Last modified: 2022/01/26 20:05
  • by admin