Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
| qcsmarine:mercuryservicechecklist [2021/01/16 21:53] – admin | qcsmarine:mercuryservicechecklist [2021/01/16 22:00] (current) – admin | ||
|---|---|---|---|
| Line 5: | Line 5: | ||
| === 60 MONTHS / 500 HOURS (WHICHEVER OCCURS FIRST) SERVICE CHECKUP === | === 60 MONTHS / 500 HOURS (WHICHEVER OCCURS FIRST) SERVICE CHECKUP === | ||
| + | <WRAP left round box 60%> | ||
| === Outboard === | === Outboard === | ||
| - | + | \\ | |
| - | == Check Before running == | + | [[http:// |
| - | + | \\ | |
| + | === Check Before running === | ||
| Inspect outboard motor and accessories for visible damage\\ | Inspect outboard motor and accessories for visible damage\\ | ||
| Drain gear housing and refill with gear lube\\ | Drain gear housing and refill with gear lube\\ | ||
| Line 29: | Line 30: | ||
| Check Thermostat and Poppet valve\\ | Check Thermostat and Poppet valve\\ | ||
| \\ | \\ | ||
| - | == EFI and DFI == | + | === EFI and DFI === |
| Check T.P.S. settings\\ | Check T.P.S. settings\\ | ||
| \\ | \\ | ||
| - | == 4 stroke only == | + | === 4 stroke only === |
| Change engine oil and replace oil filter\\ | Change engine oil and replace oil filter\\ | ||
| Check and adjust valve clearance, if necessary inspect timing belt\\ | Check and adjust valve clearance, if necessary inspect timing belt\\ | ||
| + | \\ | ||
| + | === Check While running === | ||
| - | check While running | + | Water pressure \\ |
| - | Water pressure | + | |
| Operation of water pump, cooling system and thermostat\\ | Operation of water pump, cooling system and thermostat\\ | ||
| Throttle, gearshift and reverse lock operation\\ | Throttle, gearshift and reverse lock operation\\ | ||
| Alternator is charging\\ | Alternator is charging\\ | ||
| - | Carburettor mixture and idle speed _________________________________\\ | + | Carburettor mixture and idle speed\\ |
| Operation of oil injection and low oil warning system\\ | Operation of oil injection and low oil warning system\\ | ||
| Operation of steering system, remote controls and gauges\\ | Operation of steering system, remote controls and gauges\\ | ||
| - | + | \\ | |
| - | == Optimax and EFI models == | + | === Optimax and EFI models |
| Use CDS to check engine operation\\ | Use CDS to check engine operation\\ | ||
| Check diagnostic codes\\ | Check diagnostic codes\\ | ||
| Line 51: | Line 53: | ||
| \\ | \\ | ||
| === Important === | === Important === | ||
| - | \\ | ||
| Spray powerhead with Quicksilver Corrosion Guard to protect electrical connections and exposed metal surfaces from corrosion | Spray powerhead with Quicksilver Corrosion Guard to protect electrical connections and exposed metal surfaces from corrosion | ||
| Inspect corrosion control anodes and system. Replace trim tab if required | Inspect corrosion control anodes and system. Replace trim tab if required | ||
| Line 57: | Line 58: | ||
| Additional items maybe required depending on usage and /or application | Additional items maybe required depending on usage and /or application | ||
| \\ | \\ | ||
| + | </ | ||
| + | <WRAP left round box 60%> | ||
| + | === Inboard === | ||
| \\ | \\ | ||
| **IB** = Inboard | **IB** = Inboard | ||
| Line 121: | Line 124: | ||
| Audio warning system operation (ISE)Preparation for Storage | Audio warning system operation (ISE)Preparation for Storage | ||
| Extended storage procedure completedIB = Inboard | Extended storage procedure completedIB = Inboard | ||
| + | |||
| + | </ | ||
| + | |||