qcsmarine-cnc:tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
qcsmarine-cnc:tools [2025/02/05 00:33] – adminqcsmarine-cnc:tools [2025/02/12 01:01] (current) – admin
Line 31: Line 31:
 |CuttingEdgeHeight:|1/2" / 12.7 mm | |CuttingEdgeHeight:|1/2" / 12.7 mm |
 |Diameter:|1/8" / 3.175 mm| |Diameter:|1/8" / 3.175 mm|
-|Flutes:|1|+|Flutes:|0|
 |ShankDiameter:|1/4" / 6.35 mm| |ShankDiameter:|1/4" / 6.35 mm|
 |Length:|2.5" / 63.5 mm| |Length:|2.5" / 63.5 mm|
  • qcsmarine-cnc/tools.1738715591.txt.gz
  • Last modified: 2025/02/05 00:33
  • by admin